Dantherm HCV 500, Руководство по обслуживанию

Страница: 27 / 44

27
096391
• Versio
n
2909.20
17
General ventilation functions
Introduction HCV500 can ventilate your home via three different
modes.
These
modes
can be select-
ed according to your wishes.
Keep in mind however that legislation may prescribe minimum levels for air change.
Warning
Never turn off the ventilation unit to save energy as this may cause condensation and
subsequent leaks from the duct system with the risk of water damage.
Manual
ventilation level In manual operation mode the HCV500 will run at the selected ventilation speed until
this is changed manually.
This operating level can be selected via the control panel or the HRC3 remote controller
and HCP10.
Timer-controlled
operation / weekly
program
When set to timer-controlled operation HCV500 will automatically adjust the ventilation
speed according to a predetermined weekly schedule. This can cover ventilation in a
normal family rhythm depending on whether one is home or out of the house. One of
the 11 schedules can be adapted with PC-Tool or remote controller.
Week
mode
is enabled via the control panel or HRC3 remote controller or HPC10
Sensor control
VOC and RH% sensor
(optional extra)
When set to demand controlled operation the unit is adjusted as needed. Using meas-
urements from the VOC and/or humidity sensor, the unit adjusts the fan speed accord-
ing to the need for air change. A VOC sensor measures the quality of the air.
This operating mode can only be selected if the unit is equipped with at least one of the
sensors above.