Dantherm HCV 500, Руководство по обслуживанию

Страница: 24 / 44

24
Setting operating parameters
Introduction HCV500 uses a USB-B connection to adjust the unit's parameters via Dantherm
PC-Tool / MS Windows PC.
Preparation Check that the unit is working as it should and that 230V can easily be connected and
disconnected.
Tools The following tools are necessary in order to set operating parameters.
 Computer (PC) with Windows and an available USB slot.

USB cable - USB_A to USB_B (printer cable)

Dantherm PC-Tool
Connection Follow this procedure to connect the PC and HCV500
Step Action
1 Turn on the computer
2 Install PC Tool – this can be ordered from your Dantherm dealer.
3 Power on HCV 300 with no USB cable connected.
4 Connect USB cable
5 Start PC-tool
6 Login
Log in Start Dantherm PC-Tool and select your unit on the start screen, select: “connect”
Log in with:

Installer
= “1234”

User = password is not necessary
Mandatory
parameter changes Air volumes – supply air and extracted air should always be adjusted so that they
comply correctly with the ventilation level in accordance with legislation.
Go to calibration tab in PC-Tool to adjust the fan level.