Dantherm HCV 300 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 60

Dantherm HCV 300 Скачать руководство пользователя страница 4

4

Introduction

: About this Manual

Introduction

About this Manual

This is the service manual for the Dantherm HCV product range, including residential ventila-

tion units HCV 300/400/460/500/700.
The manual contains information targetted at:
•

Product users and

•

professionals such as installers and service technicians

This manual is intended for both installers and users of the product.
Installation and repair of the unit must be carried out by qualified personnel only. It is the

responsibility of the installer to read and understand this service manual prior to initial start

and setup of the HCV unit. The warranty is limited to devices installed by trained personnel.

The USER MANUAL contains information that may be relevant to professional technicians
The INSTALLATION & SERVICE MANUAL is intended for trained personnel only.

Copying this service manual, or parts thereof, is not permitted without the prior written con-

sent of Dantherm.

Dantherm reserves the right to change and improve the product and service manual at any

time without prior notice or obligation.

Manual

Copyright

Reservations

«
...
2
3
4
5
6
...
»

Содержание HCV 300





























































Отзывы:

Нет отзывов