Dantherm Flexibox 900, Быстрая настройка

Страница: 19 / 32

19
Indoor
1
2
3
4
5
Mounting procedure
Flexibox 900 Indoor
1 Mount the support bracket on the
wall 665 mm from lower edge of
the hole in the wall.
Make sure the bracket is level.
2 Place FB900 at an angle on the
support bracket.
Make sure the flaps of the support
bracket fits in the slits in the
bottom of the FB900
3 Mark and drill two holes for screws.
Use plugs if necessary.
4 Fasten the screws -
Mount outdoor temperature
sensor. Pull the cord prior to
mounting the rain hood.
5 Mount and fasten the hood.
The use of protective
brace is optional
Make sure the flaps fit in the slits
in the bottom of the FB900
Outdoor temperature sensor