________________________________________________________________________________________________________
7
4.0 Activating the touch panel set points in the MVC80
Press the Tool button of the MVC80 controller without entering a password and go to:
- Time Program and from there to Unit Configuration:
- Open the program D1-7 you will find there
the point “BMS_SP_Control”.
Now set the point
“BMS_SP_Control” to ON and the MVC 80 will now run with the set points from
the touch panel.
5.0 Language change
Normally the touch panel works with the same language as the MVC80 controller. If you want to
change the language of the touch panel you have to open
“Time Program” / “Unit_Configuration” /
“D1-7” and find the point “Touch_Panel”. Here you can chose the language of the touch panel.
