Dantherm calorex PP22BC, Инструкция для владельца и по установке

Страница: 40 / 52

Model Units PP22BC
Cooling to pool water
Cooling mode
Ambient 45°C, 50% RH, water 32°C
COOLING
Cooling of water from 32°C
kW 13
Electrical input
kW 5.5
Electricity
Electrical supply 3 phase
Total power consumed
Min supply capacity (Max F.L.A.) 3 ph N
A
13.8
Recommended supply fuse 3 ph N
A
20.0
Water flows etc
Pool water flow rate
L/min 33
Pool water pressure drop at rated flow)
m hd 4.2
Max working pressure pool water
bar 3.5
Pool water connections
inches ¾” BSPM
Condensate drain connections
inches ¾" domestic waste
Compressor
Nominal power consumed
kWh 3.8
L.R.A. 3 ph N:-
A 48
R.L.A. 3 ph N:-
A 10
Soft start amps 3 ph N:-
A 25
Main fan
Air flow (Anemometer at air on grille. Dry evaporator)
m³/h 5000
F.L.A. 1 ph N:-
A 1.75
General data
Hermetic system
Gas charge R134a
kg 9.5
Sound pressure level at 3m Air on
dbA 54
Sound pressure level at 3m Air off
dbA 56
Sound pressure level at 3m Side
dbA 52
Sound power
dbA 67.8
*Physical dimensions
*Width (unpacked)
mm 1275
*Depth (unpacked)
mm 550
*Height (unpacked)
mm 737
Weight (unpacked)
kg 145
For Accurate Application Sizing Consult Dantherm Ltd 1mm WG = 9.8 Pa
NOTES 1) Weight and dimensions nett 1m hd =1.4 psi
2) Performance design limitations 1L/min = 0.22 gall/min
Water heating mode: Ambient = 10°C min 50°C max. Note: WA634ACL 0ºC min 35ºC max
Water = 10°C min 50°C max
Water cooling mode: Ambient = 10°C min 50°C max. Note: WA1222AC 10ºC min 40ºC max
Water = 10°C min 35°C max
3) Pool water to have correct balance, pH 7.2 - 7.8. Free Chlorine 1.0 - 2.0 ppm domestic, 3.0 - 6.0 commercial.
4) Allow 500mm clearance to service panels
5) Dantherm Ltd. reserves the right to change or modify models without prior notice
6) Global warming potential (GWP) R407c 1774, R134a 1430
40 SD331852 ISSUE 7
OWNER INSTALLATION MANUAL 634ACH/ACL/AHC /1222AC/1234BC/BHC /1834BHC /PP22BC