HEXFLOW PRODUCT USER MANUAL
4
MODEL IDENTIFICATION
MODEL IDENTIFICATION
HF-45-230-T1
CAPACITY
17 - 17 W/°F
22 - 22 W/°F0
26 - 26 W/°F
35 - 35 W/°F
45 - 45 W/°F
55 - 55 W/°F
100 - 100 W/°F
200 - 200 W/°F
VOLTAGE
115 - 115 volt / single phase
230 - 230 volt / single phase
24 - 24 VDC
48 - 48 VDC
OPTIONS
L - EXTERNAL PLUG
M - STAINLESS STEEL COVER
PXX - NON STANDARD PAINT COLOR
S - SPEED CONTROLLER
T1 - EXTERNAL FAN THERMOSTAT
Note:
Legacy model number nomenclature contained the following elements (for reference only):
“P” - Pinnacle Series HexFlow
“S” - Standard Unit Type
“0XX” - Designated Nominal Height
Example Model Number: P-S-035-045-230-TI
OPTIONS
Speed Control (-S)
The controller is designed to slow down the
speed of the internal and external fans at lower
temperatures to reduce noise and energy
consumption. It will also supply either a
normally closed (NC) or normally open (NO)
alarm signal for fan fault, sensor fault, or high
temperature.
Thermostat Control (-T1)
A snap disc thermostat controls the operation
of the external loop fan. A temperature rise
above 80F will cause the fan to be turned on,
a temperature decrease below 60F will cause
the fan to be turned off; between the range of
60F-80F the fan will be operating based on the
previous environmental condition experienced.