P
AGE
6
46310-IG-0300 <90-00226>
17.
In screen 6.2, verify the following default settings:
♦
9600 baud
♦
Parity none
♦
Stop bit 1
If any of these settings are incorrect, change them using options 1,
2, and 3.
18.
Go to option 4 and select 3 (RTS on before transmit).
19.
Type 0 and press Enter. This returns you to the Master Port Op-
tions menu. Select option 3 to confirm any changes.
20.
Type 0 and press Enter to return to the Main Menu.
System Configuration
21.
From the Main Menu, select option 4. Screen moves to line 4: Ad-
just PointMaster Time and Date Settings.
22.
Select option 2 and press Enter. Screen moves to line 4.2: Set Time.
23.
Enter the time (HH:MM:SS) and press Enter. Screen returns to
Adjust PointMaster time and Date Settings.
24.
Select option 3 and press Enter. Screen moves to line 4.3: Set Date.
25.
Enter the date (MM-DD-YYYY).
26.
If a password is desired, select option 4 and press Enter. Screen
moves to line 4.4: Set Password.
27:
Enter your password and confirm it by entering it a second time.
Note that the password is case-sensitive. Use all lowercase.
28.
Type 0 and press Enter to return to the Main Menu.
29.
Select 0 and press Enter to exit the Main Menu.
30.
End of menu configuration. Continue on to TL1 Editor portion.
TL1 E
DITOR
1.
Go to File and click on Terminal.
2.
If the site database is on a disk, load that dosk into the floppy drive
and proceed to step 3. If not, click on NEW and create the database
for the site, then proceed to step 6.
3.
In the TL1 Editor program, highlight and click on the second icon,
Open Existing Database File.
4.
Click Look In and select A:. Highlight the XXX.PDB file.
5.
Click Open. This downloads the file to the TL1 Editor.
INSTALLATION
CONTINUED
. . .
