Dantel 46131, Руководство по установке и эксплуатации

Страница: 10 / 38

P
AGE
10 46131-0598 <90-00018>
6. Refer to Table C to set the switches and straps for Responder
Port 2 (all options.) The factory setting is RS-232.
T
ABLE
C - R
ESPONDER
P
ORT
2 S
WITCH AND
S
TRAP
S
ETTINGS
(A
LL
O
PTIONS
)
NOTE: To change the switches or straps, remove the 202 modem
subassembly (options -20 and -21 only).
7. Refer to Table D to set the switches for Responder Port 4, the
202 modem port (options -20 and -21). The factory settings are
DOWN.
T
ABLE
D - R
ESPONDER
P
ORT
4 (M
ODEM
) S
WITCH
S
ETTINGS
(O
PTIONS
-20
AND
-21)
8. Refer to Table E to set the switches for control outputs 9-16 (op-
tions -01 and -21). The factory settings are Position A.
9. End of Switch and Strap Settings.
T
ABLE
E - C
ONTROL
O
UTPUT
S
WITCH
S
ETTINGS
(O
PTIONS
-01
AND
-21)
INSTALLATION
SWITCH POSITION
S1 Position A *
S1 Position B
S1 Position A *
S1 Position B
S1 Position A *
S1 Position B
S1 Position A *
S1 Position B
DESCRIPTION
Control Outputs 9-10 Normally Open
Control Outputs 9-10 Normally Closed
Control Outputs 11-12 Normally Open
Control Outputs 11-12 Normally Closed
Control Outputs 13-14 Normally Open
Control Outputs 13-14 Normally Closed
Control Outputs 15-16 Normally Open
Control Outputs 15-16 Normally Closed
* Factory Settings
* Factory Settings
STRAP OR SWITCH
Strap X802
S805
S806
S802-7
DESCRIPTION
RS-232 Interface
RS-422/485 Interface
RS-232 Interface
RS-422/485 Interface
RS-232 Interface
RS-422/485 Interface
RS-422/485 Receive Terminated
RS-422/485 Receive Not Terminated
POSITION
RS-232 *
RS-422
RS-232 *
RS-422
RS-232 *
RS-422
ON *
OFF
UPDATED
SWITCH POSITION
S1 DOWN *
S1 UP
S2 DOWN *
S2 UP
DESCRIPTION
Receive input level can be between 0 and -20 dBm
Receive input level can be between -20 and -40 dBm
Transmit output adjustable from -1 to -20 dBm
Transmit output adjustable from -20 to -40 dBm
* Factory Settings