Dante DNZ1880YM2, Руководство пользователя

Страница: 130 / 165

103
Figure 5-74
Step 2
Select “Enable” to enable face detection function.
Step 3
Click “Draw Target” to draw the size model of target filter in the video image.
Step 4
It is to set the parameters of face detection, please refer to the following sheet for more details.
Parameter Function
Working Period
Note:
It is to set the alarm period, it can enable alarm event only during the period
range which has been set.
1. Click “Setup” and the system will pop out the interface of “Working
Period”.
2. It is to set working period according to the following methods:
You can input time numerical value or press the left mouse button to
drag on the setup interface to set.
There are six periods to be set every day, select the check box in front
of the period, and then the period is valid.
Select week number (it selects Sunday by default, if it selects the whole
week, then it means the setup can be applied to the whole week, you
can also select the check box in front of the week number to implement
independent setting for some days).
3. Click “Save” to complete the setup of working period.
Enable Face
Enhancement
Select “Enable Face Enhancement” and it will guarantee that the face is
clear by priority when the stream is set very low.
Record
Check it and so when alarm occurs, system will auto record.
Record Delay System can delay the record for specified time after alarm ended.