Dante DNA3300 Series Скачать руководство пользователя страница 70

Страница: 70 / 230

Figure 4-64

4.8.4

Alarm Record/Snapshot

4.8.4.1 Alarm Record

a) Before user set alarm setup information, please go to chapter 0 to connect alarm input and

alarm output cable (such as light, siren and etc).

b) The record priority is: Alarm>Motion detect>Regular.

In the main menu, from Setting->Event-> Alarm, user can see alarm setup interface. See Figure 4-65.

Alarm in: Here is for user to select channel number.

Event type: There are four types. Local input/network input/IPC external/IPC offline alarm.

Local input alarm: The alarm signal system detects from the alarm input port.

Network input alarm: It is the alarm signal from the network.

IPC external alarm: It is the on-off alarm signal from the front-end device and can activate the

local NVR.

IPC offline alarm: Once user select this item, system can generate an alarm when the front-end

IPC disconnects with the local NVR. The alarm can activate record, PTZ, snapshot and etc. The

alarm can last until the IPC and the NVR connection resumes.

Enable: Please user need to highlight this button to enable current function.

Type: normal open or normal close.

c) Click Save button to complete alarm setup interface.

Содержание DNA3300 Series







































































































































































































































Результаты поиска

Содержание DNA3300 Series

Отзывы:

Dante DNA3300 Series, Инструкция по установке и эксплуатации, Страница: 70 / 230

Результаты поиска

Содержание DNA3300 Series

Отзывы: