Dante DNA3300 Series Скачать руководство пользователя страница 193

Страница: 193 / 230

Manual

It has the highest priority.

Enable corresponding channel to record no matter what period

applied in the record setup.

Stop

Stop current channel record no matter what period applied in the

record setup.

Start all/
stop all

Check the corresponding All button, user can enable or disable all

channels record.

5.8.4.4 RAID Manager

Important

Please make sure user purchased product support the RAID function, otherwise user can not see

the following interface.

5.8.4.4.1 RAID Config

It is for user to manage RAID HDD. It can display RAID name, type, free space, total space, status and

etc. Here user can add/delete RAID HDD.

Click Add button to select RAID type and then select HDDs, click OK button to add. See

Figure 5-80

5.8.4.4.2 Hotspare disks

Figure 5-80

, click hotspare button, user can add the hot spare HDD. See Figure 5-81. The type includes

two options:

Global: It is global hotspare disk. When any RAID becomes degrading, it can replace and build the

RAID.

Local: It is local hotspare disk. When the specified RAID becomes degrading, it can replace and build

the RAID.

Select a hot spare device and then click Delete button. Click Apply button to delete.

Содержание DNA3300 Series







































































































































































































































Результаты поиска

Содержание DNA3300 Series

Отзывы:

Dante DNA3300 Series, Инструкция по установке и эксплуатации, Страница: 193 / 230

Результаты поиска

Содержание DNA3300 Series

Отзывы: