Digital Video Recorder User Manual
68
Fig 5.2 Reset Blocks
STEP1
Enter TOOLS configuration, referring to 4.2.10 Tools Configuration.
STEP2
Click Load default. Select setup blocks; please refer to Fig 5.2 Reset Blocks.
STEP3
Press OK to do default. It will return to TOOLS interface after finished.
5.4 Check System Information
Users can check system information like firmware version, IP address, etc.
STEP1
Press right mouse to show the control bar. Click Menu, referring to Fig 4.2 Up-listed Menu.
STEP2
Click Info, the window below will appear.