Digital Video Recorder User Manual
19
CHAPTER 3
Basic Function Instructions
3.1 Power On/Off
Notice: Before you power on the unit, please make sure all the connection is good.
3.1.1 Start
There are two ways to start this DVR. One way is to Connect with the source power, switch on the power button near the
power port in the rear panel, and the system will be loaded. The other is to start by the
Power
button on the front panel,
( this method will be used only if the system is shot shut-down), please press
Power
button
3~
5 seconds, the system will
start normally, and the screen will display as Fig 3.1 System Loading.
Fig 3.1 System Loading
Following that, it will enter in live with eight screens shown below: