5
2.3.5 D-ZOOM: Set digital zoom, ON / OFF.
2.3.6 FOCUS: Setup automatic focus. AUTO–automatically control / MANU–manual.
Note: when FOCUS is in the status of MENU, press "Focus Near "or "Focus Far"
can realize manual focus of camera; Exit the menu, press Near or Far can realize
manual focus of thermal imaging.
2.3.7 WB SET: White balance setup. ATW / INDOOR / OUTDOOR / ONEPUSH / AUTO /
MANU.
2.3.8 MENU OF CAM: This item is empty.
2.3.9 RETURN: Return to the main menu.
2.4 CONTROL SETUP
2.4.1 ALARM: this item is empty.
2.4.2 HOME OPTION: Enter the submenu of set
automatic return function.
2.4.2.1
AUTO HOME: When this item is
“ON”
,
open the automatic return function. It
means that if the user has no action
within a period of time, the camera will
return to HOME. When the camera is in
a state of patrolling, it will not return to HOME. When the camera doesn’t need
to return to HOME, please set this item in “
OFF”
.
2.4.2.2
HOME POS: HOME is the return point. For example, you need to setup a scene
as HOME, you should first adjust to this
scene, setup the pre-setting point as No.3,
then move to the menu and enter this
submenu; change the number behind
HOME POS into 3. This is OK. If you want to
make the automatic function take effect,
don’t forget to setup the AUTO HOME in
“ON”
. HOME POS can be from
pre-setting point 1-50.
2.4.2.3
DWELL TIME: Setup the automatic return time, which means how long it will
return to HOME without control. The time can be set from one minute to 99
minutes.
2.4.2.4
RETURN: Return to the last menu.
2.4.3 THERM-IMAGE: It is blank.
CONTROL SETUP
= = = = = = = = = = = = = = = = = =
1
ALARM
/
2
HOME OPTION
3
THERM IMAGE
OFF
4 WIPER
OFF
5 WIPER MODE
SERIES
6
RETURN
HOME OPTION
= = = = = = = = = = = = = = = = =
1
AUTO HOME
ON
2
HOME POS
0 1
3
DWELL TIME
0 5 MIN
4
RETURN