3
4. Menu Setup Instruction
1.
Menu basic operation
a)
Use keyboard or matrix to adjust No. 64 pre-sets or adjust the No.1 pre-sets twice
within four seconds, the main menu will be open.
b)
After the menu is on the screen, if use keyboard, you can control joystick to move
cursor, turn up or down to move cursor to the item that need set, turn it left or right to
amend the contents or enter this item to set; If use matrix, operate
“
TILT UP
”
,
“
TILT
DOWN
”
to move cursor to the item that need set, operate
“
PAN LEFT,
“
PAN
RIGHT
”
to amend the contents or enter the item to set.
c)
Thermal camera has the function of memory and data will not lose settings when
power off. Main set of the menu, please refer to the menu setup.
2.
Menu Setup
2.1 MAIN MENU
2.1.1 DISPLAY SETUP: Enter the submenu of screen
display set. You can set ID display, pre-setting
point title display and camera self display.
2.1.2 CAMERA SETUP: Enter the submenu of
camera parameter set
2.1.3 CONTROL SETUP: Enter the submenu of
thermal camera control parameter set.
2.1.4 THERM IMAGE SET: Enter the submenu of
thermal image, which is displayed on both
videos.
2.1.5 PROGRAM: Enter the submenu of thermal camera enhancement function.
2.1.6 NTSC CAMERA: NTSC current mode.
2.1.7 CAM DEFAULT SET: Recover the camera’s default.
2.1.8 RESET PT: Recover the system.
2.1.9 EXIT: Exit the main menu.
MAIN MENU
= = = = = = = = = = = = = = = =
1
DISPLAY SETUP
2
CAMERA SETUP
3
CONTROL SETUP
4
THERM IMAGE SET
5
PROGRAM
6
NTSC CAMERA
7
CAM DEFAULT SET
8
RESET PT
9
EXIT