7
Chapter 2 Notice of Installation
2.1 Safety Notice
Aim to guarantee user to use the product correctly and avoid danger or loss of property.
Defense measure is including two parts “Warning” and “Notice” as follows:
Warning: Ignoring warning may cause death or great damage.
Notice: Ignoring notice may cause damage or loss of property.
Warning remind user to defend potential
factor of causing death and great
damage
Notice remind user to defend potential
factor of causing damage or loss of
property.
Warning
1. Install according to compliance with the national or regional electric specification when installing and using the
product.
2. Please use adapters from normal supplier.
Don’t connect multi cameras with one adaptor (exceeding the loading of adapter may generate excess heat or
fire)
3, Turn off the power supply when connecting or dismantling the camera, never operate the dome camera with
power.
4. Completely fix the speed dome camera when installing the item on wall.
5. If there is fume, fetor or noisy of the dome camera, please turn off power supply immediately and pull out the
cable; and contact with our sales department right away.
6. If the camera can’t work normally, please contact with us and never dismantle it. (We are not responsible for
any unauthorized modification or dismantling.
Notice
Prior to installation and use of this product, the following WARNING should be observed. This product can be
only used in specified range in order to avoid any damage or danger.
Installation and servicing should only be done by qualified service personnel;
It can not be used in unqualified temperature( over 55
℃
or below -40
℃
), high humidity ( otherwise firing
may be caused)
Only use replacement parts recommended by us.
After replacement/repair of this unit’s electronic components, conduct a resistance measurement by
multimeter to avoid short circuit or turnoff.
Please use the soft cloth to clean the camera. Use neuter cleanser if bad smeared. No use the strong or
corrosive cleanser avoiding scuffing.
The installation bracket should be capable of supporting five times the total weight of the integrated
camera.
Keep the product away from anti-magnet field, and never let other objects fall on the product. (ignoring