Dante DLA3800, Руководство по эксплуатации

Страница: 86 / 228

76
4.9.4 Activate Patrol (tour)
In
X341H341H 341H
Figure 4-45, input patrol (tour) number in the No. blank and click patrol button
4.9.5 Pattern Setup
In Figure 4-45, click pattern button and then click “begin” button. The interface is shown as in
Figure 4-49. Then you can go to Figure 4-42 X to modify zoom, focus, and iris.
Go back to Figure 4-49 and click “end” button. You can memorize all these operations as pattern
1.
Figure 4-49
4.9.6 Activate Pattern Function
In
X346H346H 346H
Figure 4-39, input mode value in the No. blank, and click pattern button.
4.9.7 Auto Scan Setup
In
X347H347H 347H
Figure 4-38, click border button. The interface is shown as in
X348H348H348H
Figure 4-43.
Please go to
X349H349H349H X349H3 49H349H
Figure 4-35, use direction arrows to select camera left limit
Then please go to
X350H350H350H
Figure 4-43
X
and click left limit button
Repeat the above procedures to set right limit.
Figure 4-50
4.9.8 Activate Auto Scan
In Figure 4-46, click “Auto Scan” button, the system begins auto scan. Correspondingly, the auto
scan button becomes Stop button. Click stop button to terminate scan operation.
4.11
4.11 4.11
4.11 Flip
Flip Flip
Flip
In Figure 4-46, click page switch button, you can see an interface is shown as below. See Figure
4-51. Here you can set auxiliary function. The aux value has relation ship with the Aux button of
the receiver/driver.
Click page switch button again, system goes back to Figure 4-42.