Brief introduction
Many thanks for purchasing
our Fast Ethernet media converter. This product supports
IEEE802.3U 100Base-Tx/Fx protocol, as well as full duplex and half duplex mode. This manual is for adaptive
100M, 10M/100M transceivers. The following purchasing guide is for customer’s reference.
Main features
1. Comply with IEEE 802.3 10 Base-T standard and IEEE 802.3u 100 Base-TX/FX standard.
2. Max. 2M buffer memory built in chip.
3. Back pressure flow control for full duplex IEEE802.3 X and half duplex.
4. Automatic identification of MDI/MDI-X cross-wire.
Technical parameters:
1. Standard Protocol: IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX/FX standard
2. Interface:
one Ethernet (RJ-45), one optical interface (SC/ST/FC)
3. Operation mode: full duplex mode or half duplex mode
4. Power supply:
External power: 5V DC 1A
Internal power: 110-265V AC/-48VDC
5. Operating temperature: 0
℃
-50
℃
6. Relative humidity: 5%-90% non-condensing
8. TP cable: CAT5, CAT5E, CAT6 UTP cable
9. Optical cable: Multi-mode fiber, Single mode fiber
10 Dimensions:
120mm*90mm*28mm (external power)
173mm*128mm*32mm (internal power)
Cautions:
1. This product is suitable for indoor application.
2. Put on the dust cover of fiber interface when not used.
3. It is forbidden to stare at the TX fiber-transfer end with naked eyes.
4. Single fiber Fast Ethernet media converter must be used in pair
Packing list
Please check the following items in the package before installing the converter
Fast Ethernet media converter
1set
DC adapter or power cord
1pc
User manual
1copy
Please notify your sales representative immediately if any of the aforementioned items is missing or damaged.
Installation
1. Interface
RJ-45 interface
Fast Ethernet media converter adopts twisted-pair with typical length of 100 meter.
Optical interface SC, ST, and FC are available.
