Per-port MDI or MDIX on RJ-45 the copper daughter board has MDI-MDIX Auto-crossover on all the RJ-
45 ports and eliminate the use of cross-over cable between the devices. Also port specific user settings
(such as FDX or HDX, copper 10/100 speed) can be fixed using software commands. Alarm Contact
Optional) Alarm Contact option is offered as a configuration option. The two alarm contacts are SPST NC
Form-C relays, and an open condition indicates abnormal status. The Hardware Alarm monitors internal
power on the main board, and the Software Alarm is activated by one or more user-selected software
traps.
Agency Approvals
UL listed (UL60950), cUL, CE, Emissions meet FCC Part 15 Class A
NEBS Level 3 and ETSI Certified for Carrier Central Offices
IEEE 1613 Class 2 Environmental Standard for Electric Power Substations
See also Note for Power Substations in Section 3.2.4, 3.6.1, and 5.2.9 IEC 61850 EMC and Operating
Conditions Class C for Power Substations
Warranty: Two years, return to factory Made in USA NEBS Testing and Certification: NEBS certified
1.2 Ordering Information
MODEL DESCRIPTION
DFG48000 Managed Fiber Switch, base unit
May be configured with a selection of 10/100/1000 DFG480XX fiber and copper port connector types.
Wire speed filtering and forwarding across all ports, 802.3x flow control, 802.1p priority packet
processing, self-learning 4K-node address table, large 240KB packet buffers for 10/100 and 120KB for
1000Mb. Plug-and-play switching services, front-mounted LEDs, internal auto-ranging AC power supply,
19" rack-mounting brackets. For licensed managed networks software, see MNS materials.
DFG48000R:
“Reverse” model, same as Model DFG48000 except the user ports and the power input connectors are in
the rear. Two sets of LEDs (both rear and front) provide duplicate status data for viewing from either
side.
Configuration Options:
Each DFG48000 frame unit has four port module slots. The first three (A, B, C) may be one of the
modules DFG480XX below; one (slot D) may only be a Gigabit module DFG48G0XX. Select up to four
port modules per base unit.
DFG48044XEYRC
Ethernet Switch 10/100Mbps 4 Copper, 4 Fiber Ports TRX 20Km SM SC
DFG48044XFYRC
Ethernet Switch 10/100Mbps 4 Copper, 4 Fiber Ports TRX 40Km SM SC
DFG48G022XEYRL
Ethernet Switch 10/100/1000Mbps 2 Copper, 2 Fiber Ports TRX 20Km SM LC
DFG48G024XFYRC
Ethernet Switch 10/100/1000Mbps 2 Copper, 4 Fiber Ports TRX 20Km SM LC
Y=-10°
～
+55C°, Z=-40°
～
+74C° (includes conformal coating)