10
10. MOUNTING THE SIDE SHELF HANDLE, SERVING TRAY
Parts Required:
1 x Serving Tray
(#17)
2 x Serving Tray Handle
(#16)
1 x Side Shelf Handle
(#19)
Installation:
• Remove the four pre-installed screws from the side of the main barrel.
Mount the side shelf handle onto the main barrel using four screws
previously removed.
• Mount serving tray handles to serving tray using the two pre-installed
screws on each handle. Place the serving tray onto the side shelf
handle. It will rest directly on the frame of the side shelf handle.
IMPORTANT: Avoid using the side shelf handle to move or lift the
grill. The weight of the unit will cause the side shelf handle to bend
or break, which is not covered by warranty.
11. INSTALLING THE GREASE TRAY
Parts Required:
1 x Grease Tray
(#13)
1 x Grease Tray Handle
(#18)
Installation:
• Remove the pre-mounted screws from the side shelf handle. On the
edge of the grease tray with two holes, align the handle with the holes,
then hand-tighten the screw (from the inside) into the handle. Note 11A.
• Slide the grease tray into the tray opening on the front panel of the
unit. The grease tray is completely inserted once the front of the tray
is flush with the front panel of the unit. Note 11B.
12. SECURING THE CHIMNEY
Parts Required:
1 x Chimney Gasket
(#4)
1 x Chimney Cap Assembly
(#5)
1 x Chimney Stack
(#6)
Installation:
• Locate the chimney opening on the side of the main barrel. Remove
the pre-installed screws.
• From the outside of the main barrel, secure the chimney gasket and
chimney stack to the side panel by re-installing the two screws. The
screw will fasten to the pre-mounted nut on the inside of the barrel.
• Next, secure the chimney cap onto the top of the chimney stack with
the screw and nut.
NOTE: Adjust the chimney cap to affect the airflow inside the main
grill. If cooking at low temperature, keep the cap more open. Ensure
the chimney cap allows for air to escape.
11A
11B
10
19
17
17
16
16
12
5
6
4
13
18
