Dannmar D2-10 Series, Инструкция по установке и эксплуатации

Страница: 4 / 88

D2-10 Series Two-Post Lifts
4
P/N 5900249 — Rev. B — February 2021
Shipping Information
Your equipment was carefully checked before shipping. Nevertheless, you should thoroughly inspect
the shipment
before
you sign to acknowledge that you received it.
When you sign the bill of lading, it tells the carrier that the items on the invoice were received in good
condition.
Do not sign the bill of lading until after you have inspected the shipment.
If any of the
items listed on the bill of lading are missing or damaged, do not accept the shipment until the carrier
makes a notation on the bill of lading that lists the missing or damaged goods.
If you discover missing or damaged goods
after
you receive the shipment and have signed the bill of
lading, notify the carrier at once and request the carrier to make an inspection. If the carrier will not
make an inspection, prepare a signed statement to the effect that you have notified the carrier (on a
specific date) and that the carrier has failed to comply with your request.
It is difficult to collect for loss or damage after you have given the carrier a signed bill of lading. If this
happens to you, file a claim with the carrier promptly. Support your claim with copies of the bill of
lading, freight bill, invoice, and photographs, if available. Our willingness to assist in helping you
process your claim does not make us responsible for collection of claims or replacement of lost or
damaged materials.
Safety Considerations
Read this entire manual carefully before using your new product.
Do not install or
operate the product until you are familiar with all operating instructions and warnings. Do not allow
anyone else to operate the product until they are familiar with all operating instructions and warnings.
Safety Information
Please note the following:
D2-10 Series Lifts are Two-Post service Lifts.
Use them only for their intended purpose.
Only operate your Lift between temperatures of 41°F to 104°F (5°C to 40°C).
The Lift should only be operated by authorized personnel. Keep children and untrained personnel
away from the Lift.
Do not make any modifications to the Lift; this voids the warranty and increases the chances of
injury or property damage.
Do not modify any safety-related features in any way.
Do not use the Lift while tired or under the influence of drugs, alcohol, or medication.
Make sure all operators read and understand this Installation and Operation Manual . Keep the
manual near the Lift at all times.
Make a visual inspection of the Lift before using it. Do not use the Lift if you find any missing or
damaged parts. Instead, take it out of service, then contact an authorized repair facility, your
distributor, or Dannmar at (877) 432-6627 or by email at support@dannmar.com .
BendPak recommends making a
thorough
inspection of the Lift at least once a year. Replace
any damaged or severely worn parts, decals, or warning labels.