P
I
02 9604 1226 E
I
|
danielaappliances.com.au
PA G E 1 8
INSTALLATION
Selection of installation equipment
1.
Cut out the work surface according to the sizes shown in the drawing. For the purpose
of installation and use, a minimum of 5 cm space shall be preserved around the hole.
Be sure the thickness of the work surface is at least 30mm. Please select heat-resistant
work surface material to avoid larger deformation caused by the heat radiation from the
hotplate. As shown below:
A(mm)
B(mm)
C(mm)
D
E
870
50 mini 30 mini
Air intake Air exit 10 mm
L(mm)
900
W(mm)
520
H(mm)
52
D(mm)
48
A(mm)
870
B(mm)
490
X(mm)
50 mini
Under any circumstances, make sure the ceramic
cooker hob is well ventilated and the air inlet and
outlet are not blocked. Ensure the ceramic cooker
hob is in good work state. As shown below.
Note:
The safety distance between the hotplate
and the cupboard above the hotplate should be at
least 760mm.
