P
I
02 9604 1226 E
I
|
danielaappliances.com.au
PA G E 1 0
USING THE HOB
BEFORE FIRST USE
IMPORTANT: You should clean the hob surface
(see “Cleaning and maintenance” section).
SWITCHING THE HOB ON
The following symbols will appear on the control panel, next to each control knob:
= Gas off
Large flame: maximum setting
Small flame: minimum setting
•
The minimum setting is at the end of the anti-clockwise rotation of the control knob.
•
All operation positions must be selected between the maximum and minimum position.
•
Never
select a knob position between the maximum and off position.
•
The symbol on the control panel, next to the control knob will indicate which gas
burner it operates.
AUTOMATIC IGNITION WITH FLAME FAILURE SAFETY DEVICE
The appliance is fitted with a flame failure safety device on each burner, which is designed
to stop the flow of gas to the burner head in the event of the flame going out.
To ignite a burner:
•
Press in the control knob of the burner that you wish to light and turn it anti-clockwise
to the maximum position.
•
If you keep the control knob depressed, the automatic ignition for the burner
will operate.
•
You should hold down the control knob for 20 seconds after the flame on the
burner has lit.
•
After this 20 second interval, turn the control knob to your required setting between
the maximum and minimum setting symbols.
•
To switch the burner off, turn the control knob fully clockwise to the gas off position.
•
In case of power failure, the burners can be lit by carefully using a match.
