background image

 

 

The Batteries are hermetically sealed pressurised primary Lithium/Manganese 
cells, and as supplied are electrically protected by a solid state device, and are 
environmentally protected by a moulded plastic housing. In this condition the units 
pose no definable hazard to health. 
Information on the composition and behaviour of these products is contained in 
the Product Safety Data Sheet, available from our website 
(

www.daniamant.com

) or on request. 

 

Disposal 

Dispose of used and expired lights in accordance with local regulations. This 
could be done through an approved environmental disposal agent.  
 
 
 

All Daniamant product disposal instructions are available within the user instruction leaflet provided with the 
product, or alternatively, available for download on this website.   

 

Daniamant’s Survivor Location Lights contain batteries as well as electrical an

d electronic components and 

must therefore be segregated from the domestic waste stream and recycled. Disposing of this product 

correctly will help save valuable resources and prevent any potential negative effects on human health and 

the environment, whic

h could otherwise arise from inappropriate waste handling. Daniamant’s lights are 

marked with the symbol below which conveys that this waste must be treated separately from household 
waste. 

 

 

To ensure compliance with the WEEE and Battery Regulations, the Survivor Location Lights placed on the 

market in the UK or Denmark should be returned to Daniamant in the UK or Denmark, or deposited in your 

nearest WEEE Designated Collection Facility, operated by your Local Authority. 

  

 

Содержание Dan MR3

Страница 1: ...lding clips require special tool for assembly and are designed to be fitted by the life jacket manufacturer Daniamant A S Industrivej 24C DK 3550 Slangerup Denmark Tel 45 47 37 38 00 Fax 45 47 37 38 09 Email orders daniamant com www daniamant com www daniamant com Dan MR3 lifejacket light Installation and Maintenance Instructions ...

Страница 2: ...om It is the responsibility of the lifejacket manufacturer to ensure that the light is attached securely and is in the correct position on the lifejacket to provide maximum visibility when the wearer is in the water Retrofit The Dan MR3 can also be fitted to lifejackets previously fitted with model Dan MR2 The original clip for the Dan MR2 must be removed and the replacement clip fitted Clip for r...

Страница 3: ...sion 2 Press the on off button for one second and the light will commence flashing then press the button once more and the light should deactivate Replacement The Dan MR3 lifejacket lights have a storage life of 5 years and must be replaced by the date shown on the label Health and safety information Dan MR3 lights contain Lithium cells These must be handled correctly Do not dismantle the light as...

Страница 4: ...et provided with the product or alternatively available for download on this website Daniamant s Survivor Location Lights contain batteries as well as electrical and electronic components and must therefore be segregated from the domestic waste stream and recycled Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and th...

Отзывы: