23
NO
SE
FI
GB
DK
NOTE!
Parts of the barbecue become very
hot when in use. Keep children at a safe
distance from the barbecue. Do not move
the barbecue whilst it is lit or hot. Never use
it indoors.
The maximum temperature of the barbecue
may be reduced if it is positioned in a very
windy location, or if you barbecue in the
winter, when it may be both cold and windy.
Stainless steel, aluminium and heatproof
paint are available in many diff erent
grades. Common to them all is that the
surroundings and use aff ect the metal in
the long term, resulting in colour changes,
peeling, etc.
Stainless steel does not mean that the metal
cannot rust, but is more an indication of
how fast the metal rusts. Rust and peeling
that occur with time due to use and being
left outside are not covered by the warranty.
WARNING!
Keep children and pets at a safe
distance from the barbecue.
Position the gas hose so that it does not
come into contact with hot parts of the
barbecue and keep it straight.
Only use gas hoses approved by the
relevant national authorities. The gas hose
must be a maximum of 150 cm long and
must be fi tted with an approved regulator.
Check regularly that the gas hose is
not cracked or crumbling and replace if
necessary.
The gas bottle must be placed next to the
barbecue. It must not stand within the
actual barbecue.
The gas bottle must be changed outside at
a safe distance from naked fl ames and other
sources of ignition.
If you discover a leak, turn off the gas supply
at the regulator immediately and avoid
naked fl ames and other sources of ignition.
Wait a few minutes until the area has aired.
Carry out a leak test when you connect a
new gas bottle or if the barbecue has not
been used for a prolonged period. Do not
carry out the leak test using a naked fl ame!
See ‘Leak test’.
Turn off the gas supply using the regulator
after use.
Do not attempt to modify the barbecue,
including the regulator and the burners. Do
not try to open parts that have been sealed
at the factory.
Assembly
Please refer to the illustrations at the back
of the user instructions. It takes 2 people to
assemble the barbecue.
Use
1. Turn all the control knobs to the OFF
position.
2. Open the lid before use.
3. Connect the regulator to the gas
bottle. Set the gas supply to ON on the
regulator. Use soapy water to check for
any gas leaks between the gas bottle
and the regulator.
4. Press the control knob for the burner
on the far left for 3-5 seconds and turn
it 90 degrees anticlockwise to position
HI. A click will be heard, and the burner
will ignite. If unsuccessful, repeat the
procedure. Hold the knob pressed in for
a few seconds once the burner is lit.
5. If the burner still does not ignite after
the second attempt, wait 5 minutes and
repeat step 4.
6. Once one burner is lit, the burner
immediately to the right can be lit in
the same way. Repeat this for all the
burners.
Содержание 94123
Страница 27: ...27 NO SE FI GB DK ...
Страница 28: ...28 NO SE FI GB DK ...
Страница 29: ...29 NO SE FI GB DK ...
Страница 30: ...30 NO SE FI GB DK ...