Dangerous Music Monitor ST-SR speaker assignment guide
The Monitor ST and (2) Monitor SRs can be set up to accommodate stereo, 5.1, and 7.1 sessions. To
use the same subwoofer in stereo and surround, use the “Speaker 3” output jack on the top Monitor SR,
channel 6 for one sub and channels 7&8 for a two sub system.
For 5.1, the Left Rear and Right Rear speakers are the same as the Left Surround and Right Surround in
a 7.1 system. The following page has setup instructions to program the Monitor ST Remote.
Monitor ST Remote software for 7.1 systems
The Dangerous Monitor ST remote software has been updated to provide new features and
functions. Foremost in this revision is the capability of up to 12 channel systems permitting ST/SR to
be implemented in systems up to 10.2. Several other features have been added or improved all of which
are detailed below.
ABOVE 5.1
For system configurations larger than 5.1, a custom hardware arrangement will be required. For
this explanation, a 7.1 system will be described. The 7.1 system will require 1 stock Monitor ST, 1
stock Monitor SR, and 1 factory modified Monitor SR. The units will be installed in contiguous rack
spaces requiring 3U total of rack space. The remote wiring interconnections begin at Monitor ST and
loop through all Monitor SRs with the actual remote connection made at the last Monitor SR.
