8 |
DANGEROUS MUSIC
Convert-AD+: Rear Panel Connections
12. ANALOG INPUTS
[REAR PANEL ANALOG INPUTS PICTURED ABOVE]
Feature: Toggle between two selectable stereo inputs.
Benefit: Two switchable stereo input paths. (See Diagrams at the end of this manual).
Examples: Use
INPUT 1
for tracking- connect two mono or one stereo mic preamp and
INPUT 2
for mixing- connect your final
mix buss here post outboard processing and then send it back in to your DAW for capture.
Use
INPUT 1
and
INPUT 2
for tracking A/B auditions. Connect 2 stereo or 4 mono mic preamps.
Use
INPUT 1
to send your individual tracks back into the session after outboard processing (committing, to avoid
recall settings in the future) and
INPUT 2
for mixing- connect your final mix buss here post outboard processing
and then send it back in to your DAW for capture.
Come up with your own scenarios and get creative-
Note:
These inputs cannot be selected simultaneously (that’s called a “mixer”, folks).
All connections wired pin 2 hot as per AES standards.
13. AES OUTPUTS
[REAR PANEL AES OUTPUT CONNECTORS 1 & 2 PICTURED ABOVE]
Feature: Dual AES Outputs.
Benefit: Send the digital signal to two different AES inputs. When connecting AES, use a high quality 110 ohm cable. (Jumperz
Audio Cables and Redco both manufacture these).
Note:
All digital outputs are live at all times (most advantageous).
