CONVERT-2
| 7
15. MONITOR ST REMOTE I/O
[REAR PANEL MONITOR ST REMOTE IN & THRU CONNECTORS PICTURED ABOVE]
Feature: Connect the Dangerous Music Monitor ST Remote here.
Benefit: Control four input selection options on the Convert-2 directly from the Monitor ST. (Optical SPDIF [Toslink] activated
from Convert-2 via a manual button press).
Tip:
,
Add D/A to your existing Monitor ST.
16. POWER & SWITCHING
[REAR PANEL 3 PIN IEC CONNECTOR PICTURED ABOVE]
Feature: Three pin IEC cable.
Benefit: Simple to replace if lost.
!
Feature: Switching power supply auto detects voltage.
Benefit: Travel with your favorite gear anywhere in the world while spreading the audio truth.
Operation: Unit ships with voltage appropriate fuse value. To change it, use a screwdriver to gently pry the mains inlet module’s
cover open and insert the correct voltage. Fuses for the alternate voltage are included in the shipping box.
Tip:
,
The power switch is on the inlet module. Seat the AC cable completely and use properly grounded power mains for safe
and quiet operation.
Tip:
,
If the Convert-2 will not power on and the power is known to be good, check the fuses under the inlet module’s cover.
Use 2 amp slo-blow for 120V (America) and 1 amp slo-blow for 240V (Europe).
