COMPRESSOR
| 3
Feature: Three pin IEC cable.
Benefit: Simple to replace if lost.
!
Feature: Selectable voltage.
Benefit: Travel with your audio tools anywhere in the world while compressing / limiting judiciously, artfully and with
integrity.
Operation: Please review the mains voltage in the red window before plugging in the unit or electrifying events may transpire. To
modify the voltage, use a screwdriver to gently pry the mains inlet module’s cover open and flip the fuse block around
so the correct voltage appears in the window.
Tip:
,
The power switch is on the inlet module. Seat the AC cable completely and use properly grounded power mains for safe
and quiet operation.
Tip:
,
If the COMPRESSOR will not power on and the outlet has proved to be working (plug in a lamp?), check the fuses
under the inlet module’s cover. Use 500 milliamp fast blow for 120V (America) and 250 milliamp fast blow for 240V
(Europe).
COMPRESSOR: Front Panel Features & Benefits
1. ENGAGE IN & OUT
[
jean
luc
picard
“
engage
”
button
pictured
above
]
Feature: Hard wire bypass
engage
switch
.
Benefit: Allows true A/B comparisons by completely removing the hardware from the circuit while in bypass. In other words,
many units always send your audio through the circuitry even when in “bypass,” thus compromising the sound