Danfoss WS103, Техническая информация

Страница: 17 / 32

•
Turn the engine off.
•
Remove electronic components from the machine before any arc welding.
•
Disconnect the negative battery cable from the battery.
•
Do not use electrical components to ground the welder.
•
Clamp the ground cable for the welder to the component that will be welded as close as possible to
the weld.
Disposal
European Union legislation requirements when disposing this device, accessories and its package
According to the Waste Electrical and Electronic Equipment Directive (WEEE Directive), this
device should not be mixed with general household waste. For proper treatment, recovery
and recycling, please take this device to designated collection points where it will be
accepted free of charge.
Technical Information
WS103 Remote Solution
Safety information
© Danfoss | April 2016 BC00000365en-US0102 | 17