![background image](http://html1.mh-extra.com/html/danfoss/vlt/vlt_programming-manual_3511862123.webp)
3.18 Main Menu - FC Closed Loop - Group 20
This parameter group is used for configuring the closed loop PID Controller, that controls the output frequency of the frequency
converter.
3.18.1 20-0* Feedback
This parameter group is used to configure the feedback signal for the frequency converter’s closed loop PID Controller. Whether
the frequency converter is in Closed Loop Mode or Open Loop Mode, the feedback signals can also be shown on the frequency
converter’s display, be used to control a frequency converter analog output, and be transmitted over various serial communi-
cation protocols.
Setpoint 1
P 20-21
Setpoint 2
P 20-22
Setpoint 3
P 20-23
Feedback 1 Source
P 20-00
Feedback 2 Source
P 20-03
Feedback 3 Source
P 20-06
Feedback conv.
P 20-01
Feedback conv.
P 20-04
Feedback conv.
P 20-07
Feedback 1
Feedback 2
Feedback 3
Feedback
Feedback Function
P 20-20
Multi setpoint min.
Multi setpoint max.
Feedback 1 only
Feedback 2 only
Feedback 3 only
Sum (1+2+3)
Difference (1-2)
Average (1+2+3)
Minimum (1|2|3)
Maximum (1|2|3)
Setpoint to
Reference
Handling
0%
0%
0%
0%
130BA354.12
20-00 Feedback 1 Source
Option:
Function:
Up to three different feedback signals
can be used to provide the feedback
signal for the frequency converter’s
PID Controller.
This parameter defines which input
will be used as the source of the first
feedback signal.
Analog input X30/11 and Analog
input X30/12 refer to inputs on the
optional General Purpose I/O board.
[0]
No function
[1]
Analog input 53
[2]
*
Analog input 54
[3]
Pulse input 29
[4]
Pulse input 33
[7]
Analog input X30/11
[8]
Analog input X30/12
20-00 Feedback 1 Source
Option:
Function:
[9]
Analog Input X42/1
[10]
Analog Input X42/3
[11]
Analog Input X42/5
[15]
Analog Input X48/2
[100] Bus feedback 1
[101] Bus feedback 2
[102] Bus feedback 3
[104] Sensorless Flow
Requires set up by MCT10 with
sensorless specific plug in.
[105] Sensorless Pressure
Requires set up by MCT10 with
sensorless specific plug in.
Parameter Description
VLT
®
HVAC Drive Programming Guide
122
MG.11.CB.02 - VLT
®
is a registered Danfoss trademark
3
3
Содержание VLT
Страница 1: ...MAKING MODERN LIVING POSSIBLE Programming Guide VLT HVAC Drive...
Страница 230: ...www danfoss com drives MG11CB02 130R0318 MG11CB02 Rev 2010 09 10...
Страница 231: ......