![background image](http://html1.mh-extra.com/html/danfoss/vlt-series/vlt-series_programming-manual_3460644099.webp)
13-01 Start Event
Option:
Function:
[22]
Comparator 0
Use the result of comparator 0 in the
logic rule.
[23]
Comparator 1
Use the result of comparator 1 in the
logic rule.
[24]
Comparator 2
Use the result of comparator 2 in the
logic rule.
[25]
Comparator 3
Use the result of comparator 3 in the
logic rule.
[26]
Logic rule 0
Use the result of logic rule 0 in the
logic rule.
[27]
Logic rule 1
Use the result of logic rule 1 in the
logic rule.
[28]
Logic rule 2
Use the result of logic rule 2 in the
logic rule.
[29]
Logic rule 3
Use the result of logic rule 3 in the
logic rule.
[33]
Digital input DI18
Use the value of DI18 in the logic rule
(High = TRUE).
[34]
Digital input DI19
Use the value of DI19 in the logic rule
(High = TRUE).
[35]
Digital input DI27
Use the value of DI27 in the logic rule
(High = TRUE).
[36]
Digital input DI29
Use the value of DI29 in the logic rule
(High = TRUE).
[37]
Digital input DI32
Use the value of DI32 in the logic rule
(High = TRUE).
[38]
Digital input DI33
Use the value of DI33 in the logic rule
(High = TRUE).
[39]
Start command
This event is TRUE if the frequency
converter is started by any means
(either via digital input, field bus or
other).
[40]
Drive stopped
This event is TRUE if the frequency
converter is stopped or coasted by
any means (either via digital input,
fieldbus or other).
[41]
Reset Trip
This event is TRUE if the frequency
converter is tripped (but not trip-
locked) and the reset button is
pressed.
[42]
Auto Reset Trip
This event is TRUE if the frequency
converter is tripped (but not trip-
locked) and an Automatic Reset is
issued.
[43]
OK Key
This event is TRUE if the OK key on
the LCP is pressed.
13-01 Start Event
Option:
Function:
[44]
Reset Key
This event is TRUE if the Reset key on
the LCP is pressed.
[45]
Left Key
This event is TRUE if the Left key on
the LCP is pressed.
[46]
Right Key
This event is TRUE if the Right key on
the LCP is pressed.
[47]
Up Key
This event is TRUE if the Up key on
the LCP is pressed.
[48]
Down Key
This event is TRUE if the Down key on
the LCP is pressed.
[50]
Comparator 4
Use the result of comparator 4 in the
logic rule.
[51]
Comparator 5
Use the result of comparator 5 in the
logic rule.
[60]
Logic rule 4
Use the result of logic rule 4 in the
logic rule.
[61]
Logic rule 5
Use the result of logic rule 5 in the
logic rule.
[76]
Digital Input x30 2
[77]
Digital Input x30 3
[78]
Digital Input x30 4
[90]
ECB Drive Mode
[91]
ECB Bypass Mode
[92]
ECB Test Mode
[100] Fire Mode
13-02 Stop Event
Option:
Function:
Select the boolean (TRUE or FALSE)
input to deactivate Smart Logic
Control.
[0]
*
False
Enters the fixed value of FALSE in the
logic rule.
[1]
True
Enters the fixed value TRUE in the
logic rule.
[2]
Running
See parameter group 5-3* for further
description.
[3]
In range
See parameter group 5-3* for further
description.
[4]
On reference
See parameter group 5-3* for further
description.
[5]
Torque limit
See parameter group 5-3* for further
description.
[6]
Current limit
See parameter group 5-3* for further
description.
[7]
Out of current
range
See parameter group 5-3* for further
description.
Parameter Description
VLT
®
HVAC Drive Programming Guide
98
MG.11.CC.02 - VLT
®
is a registered Danfoss trademark
3
3