![background image](http://html1.mh-extra.com/html/danfoss/vlt-series/vlt-series_programming-manual_3460644118.webp)
3.15.4 15-3* Alarm Log
Parameters in this group are array parameters, where up to
10 fault logs can be viewed. [0] is the most recent logged
data, and [9] the oldest. Error codes, values, and time
stamp can be viewed for all logged data.
15-30 Alarm Log: Error Code
Array [10]
Range:
Function:
0
*
[0 - 255 ] View the error code and look up its meaning in
the
Troubleshooting
chapter.
15-31 Alarm Log: Value
Array [10]
Range:
Function:
0
*
[-32767 - 32767 ] View an extra description of the error.
This parameter is mostly used in
combination with alarm 38 ‘internal
fault’.
15-32 Alarm Log: Time
Array [10]
Range:
Function:
0 s
*
[0 - 2147483647 s] View the time when the logged event
occurred. Time is measured in seconds
from frequency converter start-up.
15-33 Alarm Log: Date and Time
Range:
Function:
Size related
*
[ 0 - 0 ] Array parameter; Date & Time 0 - 9: This
parameter shows at which time the
logged event occurred.
3.15.5 15-4* Drive Identification
Parameters containing read only information about the
hardware and software configuration of the frequency
converter.
15-40 FC Type
Range:
Function:
0
*
[0 - 0 ] View the FC type. The read-out is identical to the
frequency converter series power field of the type
code definition, characters 1-6.
15-41 Power Section
Range:
Function:
0
*
[0 - 0 ] View the FC type. The read-out is identical to the
frequency converter series power field of the type
code definition, characters 7-10.
15-42 Voltage
Range:
Function:
0
*
[0 - 0 ] View the FC type. The read-out is identical to the
frequency converter series power field of the type
code definition, characters 11-12.
15-43 Software Version
Range:
Function:
0
*
[0 - 0 ] View the combined SW version (or ‘package
version’) consisting of power SW and control SW.
15-44 Ordered Typecode String
Range:
Function:
0
*
[0 - 0 ] View the type code string used for re-ordering the
frequency converter in its original configuration.
15-45 Actual Typecode String
Range:
Function:
0
*
[0 - 0 ]
View the actual string.
15-46 Frequency Converter Ordering No
Range:
Function:
0
*
[0 - 0 ] View the 8-digit ordering number used for re-
ordering the frequency converter in its original
configuration.
15-47 Power Card Ordering No
Range:
Function:
0
*
[0 - 0 ]
View the power card ordering number.
15-48 LCP Id No
Range:
Function:
0
*
[0 - 0 ]
View the LCP ID number.
15-49 SW ID Control Card
Range:
Function:
0
*
[0 - 0 ] View the control card software version number.
15-50 SW ID Power Card
Range:
Function:
0
*
[0 - 0 ] View the power card software version number.
15-51 Frequency Converter Serial Number
Range:
Function:
0
*
[0 - 0 ]
View the frequency converter serial number.
15-53 Power Card Serial Number
Range:
Function:
0
*
[0 - 0 ]
View the power card serial number.
15-59 CSIV Filename
Range:
Function:
Size related
*
[0 - 0 ]
CSIV Filename readout.
Parameter Description
VLT
®
HVAC Drive Programming Guide
MG.11.CC.02 - VLT
®
is a registered Danfoss trademark
117
3
3