1.3.8 Location of Control Terminals
130BB622.10
Illustration 1.7 IP20 380-480 V, 0.37-22 kW
1.
Place a screwdriver behind the terminal cover to
activate snap.
2.
Tilt the screwdriver outwards to open the cover.
130BB624.10
Illustration 1.8 IP20 380-480 V, 30-90 kW
1.
Place a screwdriver behind the terminal cover to
activate snap.
2.
Tilt the screwdriver outwards to open the cover.
Digital input 18, 19 and 27 mode is set in
5-00 Digital Input
Mode
(PNP is default value) and digital input 29 mode is
set in
5-03 Digital Input 29 Mode
(PNP is default value).
Control terminals
Illustration 1.9
shows all control terminals of the frequency
converter. Applying Start (terminal 18), connection
between terminal 12-27 and an analog reference (terminal
53 or 54 and 55) make the frequency converter run.
18 19
12 20 55
27 29 42 45 50 53 54
DIGI IN/OUT
DIGI IN/OUT
DIGI IN
DIGI IN
61 68 69
N
P
COMM. GND
+24V
0/4-20mA A OUT / DIG OUT
0/4-20mA A OUT / DIG OUT
COM A IN
COM DIG IN
10V/20mA IN
10V/20mA IN
10V OUT
130BB985.10
BUS TER.
OFF
ON
Illustration 1.9 Control Terminals
Quick Guide
VLT
®
HVAC Basic Drive Cascade Controller Quick Guide
10
MG18F402 - VLT
®
is a registered Danfoss trademark
1
1
