4-53 Warning Speed High
Range:
Function:
Size
related
*
[ par.
4-52 -
par.
4-13
RPM]
NOTICE!
Any changes in
reset the value
in
parameter 4-53 Warning Speed High
to the value in
If a different value is needed in
parameter 4-53 Warning Speed High
, it
must be set after programming
parameter 4-13 Motor Speed High Limit
[RPM]
Enter the n
HIGH
value. When the motor speed
exceeds this limit (n
HIGH
), the display reads
SPEED HIGH. The signal outputs can be
programmed to produce a status signal on
terminal 27 or 29 and on relay output 01 or
02. Program the upper signal limit of the
motor speed, n
HIGH
, within the normal
working range of the adjustable frequency
drive.
4-56 Warning Feedback Low
Range:
Function:
-999999.999
ProcessCtrlUnit
*
[ -999999.999 -
par. 4-57
ProcessCtrlUnit]
Enter the lower feedback
limit. When the feedback
drops below this limit, the
display reads Feedb
Low
.
The signal outputs can be
programmed to produce a
status signal on terminal
27 or 29 and on relay
output 01 or 02.
4-57 Warning Feedback High
Range:
Function:
999999.999
ProcessCtrlUnit
*
[ par. 4-56 -
999999.999
ProcessCtrlUnit]
Enter the upper feedback
limit. When the feedback
exceeds this limit, the
display reads Feedb
High
.
The signal outputs can be
programmed to produce a
status signal on terminal
27 or 29 and on relay
output 01 or 02.
4-64 Semi-Auto Bypass Set-up
Option:
Function:
[0]
*
OFF
No function
[1]
Enabled Starts the semi-automatic bypass set-up and
continues with the procedure described above.
5-01 Terminal 27 Mode
Option:
Function:
NOTICE!
This parameter cannot be adjusted while
the unit is running.
[0]
*
Input
Defines terminal 27 as a digital input.
[1]
Output Defines terminal 27 as a digital output.
5-02 Terminal 29 Mode
Option:
Function:
[0]
*
Input
Defines terminal 29 as a digital input.
[1]
Output
Defines terminal 29 as a digital output.
NOTICE!
This parameter cannot be adjusted while the motor is
running.
How to Program
Instruction Manual
MG11F522
Danfoss A/S © 08/2014 All rights reserved.
93
6
6
Содержание VLT HVAC Drive FC 102
Страница 2: ......
