![background image](http://html1.mh-extra.com/html/danfoss/vlt-devicenet-mca-104/vlt-devicenet-mca-104_programming-manual_3661167020.webp)
5.3 DeviceNet Object Classes
5.3.1 Class ID 01h Identity Object
Class ID 01h identity object is a standard DeviceNet object for identification of the device (frequency converter). Set the
heartbeat interval in this object. The attributes supported for this class are listed in
.
Attribute
Access
Name
Data type
Minimum/
Maximum
Units
Default
Description
1
Get
Vendor
USINT
–
–
97
Danfoss Drives Vendor
code.
2
Get
Device Type
UNIT
–
–
2
AD/DC Motor.
3
Get
Product Code
UNIT
–
–
100
See
.
4
Get
Revision
UNIT
–
–
–
Software version on FC
102, FC 202, or FC 300.
5
Get
Status
UNIT
–
–
–
6
Get
Serial Number
UDINT
–
–
–
From frequency
converter.
7
Get
Product Name
String
–
–
–
FC 100, FC 202, or FC
300.
10
Get/Set
Heartbeat
Interval
USINT
0–255
s
0
Off.
Table 5.3 Class ID 0x01
5.3.2 Class ID 03h DeviceNet Object
Class ID 03h DeviceNet object is a standard DeviceNet object for configuration and status of the DeviceNet connection. The
attributes supported for this class are listed in
Attribute
Access
Name
Data type
Minimum/
Maximum
Units
Default
Description
1
Get/Set
MAC ID
USINT
0–63
–
63
Node address.
2
Get/Set
Baud rate
USINT
0–2
–
0
0=125
1=250
2=500
4
Get
BOC
–
–
–
–
Bus-off counter.
5
Get
Allocate
information
–
–
–
–
Only required if
predefined master/slave
is implemented.
6
Get
MAC ID switch
changed
BOOL
0–1
–
0
The node address switch
has changed since the
last power-up/reset.
7
Get
Baud rate
switched from
last power-up
BOOL
0–1
–
0
The baud rate switch has
changed since the last
power-up.
Table 5.4 Class ID 0x03
Parameter Access
VLT
®
DeviceNet MCA 104
18
Danfoss A/S © 12/2015 All rights reserved.
MG92F102
5
5
Содержание VLT DeviceNet MCA 104
Страница 2: ......
Страница 49: ...Index Programming Guide MG92F102 Danfoss A S 12 2015 All rights reserved 47...