Danfoss VLT AQUA Drive FC 202, Руководство по установке

Страница: 35 / 124

3.3.6 Terminal Locations for Enclsoure Size F18
Consider the position of the terminals when designing the cable access.
F-frame units have 4 interlocked cabinets:
•
Input options cabinet (not optional for LHD)
•
Filter cabinet
•
Rectifier cabinet
•
Inverter cabinet
See chapter 1.3.3 Exploded View Drawings for exploded views of each cabinet. Mains inputs are located in the input option
cabinet, which conducts power to the rectifier via interconnecting bus bars. Output from the unit is from the inverter
cabinet. No connection terminals are located in the rectifier cabinet. Interconnecting bus bars are not shown.
1 2 3
4
0.0[0.00] 76.4[3.01]
128.4[5.05] 119.0[4.69] 171.0[6.73]
294.6[11.60] 344.0[13.54] 3639[14.33] 438.9[17.28]
75.3[2.96] 150.3[5.92] 154.0[6.06]
219.6[18.65]
0.0[0.00]
244.4[9.62]
244.4[1.75]
939.0[36.97]
1031.4[40.61]
0.0[0.00]
134.6[5.30]
130BA851.12
0.0[1.75]
1 Right side cut-away 3 Left side cut-away
2 Front view 4 Ground bar
Figure 3.15 Input Option Cabinet, Enclosure Size F18 - Fuses Only
The gland plate is 42 mm below the 0 level. Shown are the left side view, front, and right.
Mechanical Installation Installation Manual
MG21B322 Danfoss A/S © 10/2015 All rights reserved. 31
3 3