The Function Setup parameters are grouped in the following way:
Q3-1 General Settings
Q3-10 Clock Settings
Q3-11 Display Settings
Q3-12 Analog Output
Q3-13 Relays
0-70 Set Date and Time
0-20 Display Line 1.1 Small
6-50 Terminal 42 Output
Relay 1
⇒
5-40 Function Relay
0-71 Date Format
0-21 Display Line 1.2 Small
6-51 Terminal 42 Output Min Scale
Relay 2
⇒
5-40 Function Relay
0-72 Time Format
0-22 Display Line 1.3 Small
6-52 Terminal 42 Output Max Scale Option relay 7
⇒
5-40
Function Relay
0-74 DST/Summertime
0-23 Display Line 2 Large
Option relay 8
⇒
5-40
Function Relay
0-76 DST/Summertime Start
0-24 Display Line 3 Large
Option relay 9
⇒
5-40
Function Relay
0-77 DST/Summertime End
0-37 Display Text 1
0-38 Display Text 2
0-39 Display Text 3
Q3-2 Open-loop Settings
Q3-20 Digital Reference
Q3-21 Analog Reference
3-02 Minimum Reference
3-02 Minimum Reference
3-03 Maximum Reference
3-03 Maximum Reference
3-10 Preset Reference
6-10 Terminal 53 Low Voltage
5-13 Terminal 29 Digital Input
6-11 Terminal 53 High Voltage
5-14 Terminal 32 Digital Input
6-14 Terminal 53 Low Ref/Feedb. Value
5-15 Terminal 33 Digital Input
6-15 Terminal 53 High Ref/Feedb. Value
Q3-3 Closed-loop Settings
Q3-30 Feedback Settings
Q3-31 PID Settings
1-00 Configuration Mode
20-81 PID Normal/Inverse Control
20-12 Reference/Feedb.Unit
20-82 PID Start Speed [RPM]
3-02 Minimum Reference
20-21 Setpoint 1
3-03 Maximum Reference
20-93 PID Proportional Gain
6-20 Terminal 54 Low Voltage
20-94 PID Integral Time
6-21 Terminal 54 High Voltage
6-24 Terminal 54 Low Ref/Feedb Value
6-25 Terminal 54 High Ref/Feedb Value
6-00 Live Zero Timeout Time
6-01 Live Zero Timeout Function
How to program the adjustab...
VLT AQUA 12-Pulse High Power Instruction Manual
MG.20.Y1.22 - VLT
®
is a registered Danfoss trademark
6-5
6
6
