Title
Literature no.
VLT 2800 Operating Instructions
MG.27.AX.YY
VLT 2800 Design Guide
MG.27.EX.YY
VLT 2800 Data Sheet
MD.27.AX.YY
Mounting Instruction for VLT 2800
MI.28.AX.YY
VLT 2800 Filter Instruction
MI.28.BX.YY
Precise Stop
MI.28.CX.YY
Cold Plate
MI.28.DX.YY
VLT 2800 NEMA 1 Terminal Covering
MI.28.EX.YY
VLT 2800 DeviceNet Cable
MI.28.FX.YY
VLT 2800 Blue Star Condensing Unit
MI.28.GX.YY
VLT 2880 - 2882 Spare Part Instruction
MI.28.HX.YY
Wobble Function
MI.28.JX.YY
VLT 2800 LCP Remote-mounting Kit
MI.56.AX.YY
User Instruction for LOP
MI.90.EX.YY
Brake Resistor
MI.90.FX.YY
Profibus DP Manual
MG.90.AX.YY
VLT 2800 DeviceNet Manual
MG.90.BX.YY
Metasys N2 Manual
MG.90.CX.YY
Profibus Manual
MG.90.EX.YY
Output Filter Manual
MG.90.NX.YY
Brake Resistor Manual
MG.90.OX.YY
MCT-10 Manual
MG.10.RX.YY
Modbus RTU Manual
MG.10.SX.YY
Protection against Electrical Hazards
MN.90.GX.YY
X = Revision Number, Y = Language code
Application notes can be found on
Danfoss website under
BusinessAreas/DrivesSolutions/Doc-
umentations/TeDocumentation.htm
1.2.3 Approvals
1.2.4 Disposal Instruction
Equipment containing electrical components must not be disposed of
together with domestic waste.
It must be separately collected with electrical and electronic waste
according to local and currently valid legislation.
1.3 Mechanical Installation
VLT 2800 frequency converters allow side-by-side installation on a wall in any position as the units
do not require ventilation on the side. Because of the need for cooling, there must be 10 cm free
air passage above and below the frequency converter.
All units with enclosure IP 20 must be integrated in cabinets and panels. IP 20 is not suitable for
remote mounting. In some countries, e.g. in the USA, units with enclosure NEMA 1 are approved
for remote mounting.
1 Quick Guide
VLT 2800 Quick Guide
1
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]