manualshive.com logo in svg

Danfoss Vacon NXP Series, Руководство по эксплуатации, Страница: 94 / 174

Поделиться
Скачать
Danfoss Vacon NXP Series Скачать руководство пользователя страница 94

8.4.7.2 Copying the Frequency Reference Set to the Control Panel

Context:

These are special functions only available in menu M3.

Use these instructions to copy the frequency reference set from I/O or fieldbus to control panel.

Prerequisites:

Make sure to be in menu M3 and that the control mode is other than keypad.

Procedure

1.

Keep the [enter] button pushed down for 3 s.

In other menu than M3, when the keypad is not the active control mode and the start button is pushed, an error message 

Keypad

Control NOT ACTIVE

 shows.

8.5 Using the Active Faults Menu (M4)

8.5.1 Finding the Active Faults Menu

Context:

The Active faults menu shows a list of active faults. When there are no active faults, the menu is empty.

For more information on the fault types and how to reset faults, see 

11.1 General Information on Fault Tracing

 and 

11.2 Resetting a

Fault

. For the fault codes, possible causes and information on how to correct the fault, see 

12.10 Fault Codes

.

Using the Control Panel

Operating guide | VACON® NXS/NXP Air-cooled

DPD00910G

94 | Danfoss A/S © 

2018.06

Содержание Vacon NXP Series















































































































































































Отзывы:

Нет отзывов