Danfoss Turbocor Twin-Turbine TTS Series Скачать руководство пользователя | Manualshive

Страница: 9 / 114

background image

9 of 114

M-AP-001-EN Rev. Q

Proprietary Notice

Copyright, Limitations of Liability and Revision Rights.

This publication contains proprietary information to Danfoss LLC. This publication is protected under
the Copyright laws of the United States of America (USA) and most other countries. This work is owned
by Danfoss LLC, and was published as of the most recent revision of this publication, as indicated on
the Title page of this document. This document is for the use Danfoss LLC customers and prospective
customers only. Any use beyond that is prohibited.

Tests have demonstrated that equipment produced according to the guidelines provided in this
manual will function properly, however Danfoss LLC cannot guarantee the equipment to work in every
physical, hardware or software environment.

The guidelines provided in this manual are provided “AS-IS” without any warranty of any kind, either
express or implied, including, without limitation, any implied warranties of condition, uninterrupted
use, merchantability, fitness for a particular purpose.

In no event shall Danfoss LLC be liable for direct, indirect, special, incidental or consequential damages
arising out of the manufacture, use, or the inability to manufacture or use information contained
in this manual, even if advised of the possibility of such damages. In particular, Danfoss LLC is not
responsible for any costs, including but not limited to those incurred as a result of lost profits or
revenue, loss of damage or equipment, loss of computer programs, loss of data, the costs to substitute
these, or any claims by third parties. In any event, Danfoss LLC's total aggregate liability for all
damages of any kind and type (regardless of whether based in contract or tort) shall not exceed the
purchase price of this product.

Danfoss LLC reserves the right to revise the publication at any time and to make changes to its
contents without prior notice or any obligation to notify former or present users of such revisions or
changes.

Danfoss

LLC

1769

East

Paul

Dirac

Drive

Tallahassee,

Florida

32310

USA

Phone

1-850-504-4800

Fax

1-850-575-2126

http://turbocor.danfoss.com

Encounter an error or see opportunity for improvements while reading

this manual? Email us at [email protected] with a brief

description.

* Subject to change without notice.

* Danfoss Turbocor’s commitment to excellence ensures continuous product improvements.

THIS PAGE INTENTIONALLY LEFT BLANK

«
...
7
8
9
10
11
...
»

Содержание Turbocor Twin-Turbine TTS Series



















































































































Отзывы:

Нет отзывов

Похожие инструкции для Turbocor Twin-Turbine TTS Series

Бренд: King Canada Страницы: 4

Бренд: Parker Страницы: 22

Бренд: California Air Tools Страницы: 17

Бренд: LACAIR Страницы: 16

Бренд: Bambi Страницы: 12

Бренд: Atlas Copco Страницы: 88

Бренд: Atlas Copco Страницы: 132

Бренд: FScurtis Страницы: 42

Бренд: Danfoss Страницы: 28

Бренд: WilTec Страницы: 11

Бренд: Schulz Страницы: 24

Profi-AirTec 128-8-1.1

Бренд: Regen-Tec Страницы: 6

Бренд: Sparmax Страницы: 2

Бренд: YATO Страницы: 40

Бренд: Valeo Страницы: 47

Бренд: AC Tool Supply Страницы: 20

Бренд: Xstream Страницы: 38

Бренд: Wagan Страницы: 1

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды