![background image](http://html1.mh-extra.com/html/danfoss/turbocor-tt-series/turbocor-tt-series_service-manual_4104524248.webp)
Figure 4-276 Suction Pressure/Temperature Sensor Removal
4.32.4.2 Suction Pressure/Temperature Sensor Installation
1. Check and clean the O-ring, housing thread, and O-ring sealing surface in the IGV Housing.
2. Apply lube to O-ring.
3. Insert the sensor and engage the first few threads by hand.
4. Using a deep 15/16" socket, tighten the sensor to 10 Nm (7 ft.lb).
5. Reconnect the sensor connector.
6. Leak test and evacuate in accordance with standard industry practices.
7. Return the compressor to normal operation.
4.32.4.3 Discharge Pressure/Temperature Sensor Removal
1. Isolate the compressor power as described in Section 1.8 Electrical Isolation on page 22.
2. Recover the refrigerant according to industry standards.
3. Disconnect the sensor connector.
4. Using a deep 15/16" socket, remove the sensor from the compressor housing.
Figure 4-277 Discharge Pressure/Temperature Sensor
4.32.4.4 Discharge Pressure/Temperature Sensor Installation
1. Check and clean O-ring, housing thread, and O-ring sealing surface in the compressor housing.
2. Apply lube to O-ring.
3. Insert the sensor and engage the first few threads by hand.
4. Using a deep 15/16" socket, tighten the sensor to 10 Nm (7 ft.lb).
5. Reconnect the sensor connector.
6. Leak test and evacuate in accordance with standard industry practices.
Page 248 of 294 - M-SV-001-EN Rev. H 1/23/2023
Содержание Turbocor TT Series
