10
The unit is now in
RUN mode
(colon fl ashes in
display) and the heating will operate according
to the preset programmes.
a) Press
PROG
until Event 1 fl ashes, then press
DAY
to move from current day to Day 1.
b)
Amend the time and temperature as
follows:
i)
Use
+ and –
buttons to alter time
(press and hold to change in 10 min
increments).
ii)
Use
and
buttons to alter
temperature in 0.5°C (1°F) steps.
iii) Press
NEXT
to advance to next Event.
iv) Repeat steps i,ii & iii above for Events 2,
3, 4, 5 & 6.
Programming in 7-day mode
(separate programmes for each day of the week)
1
Before you change the preset programmes
Your installer will have set your unit to operate in either
7-day mode
or
5/2 day mode
. To tell which mode your unit is set press
PROG
until
Event 1 fl ashes in the display.
This unit is in
7-day
mode and you can programme
diff erent settings for each day of the week
(see page 10-
11
).
This unit is in
5/2 day
mode and you can enter one of
set of programmes for weekdays and another set for
weekends (
see page 11
).
1
1 2 3 4 5
User Instruc
tions
GB