2.0 Functional description
District heating substation for indirect heating. Designed for
wall-mounting.
Application
The Termix VX is a complete solution for space heating with optimal
safety, efficient energy transfer, service-friendly construction and
a compact design. The substation is used if a heat exchanger is
required or on a conversion to district heating where the existing
equipment is unsuitable for direct connection. The Termix VX
substation is ideal, when a high level of security against burst pipes
and water damage in the heating system is required.
District heating (DH)
The substation is prefabricated with a differential pressure
controller, fitting piece and sensor pockets for insertion of a heat
meter as well as strainers and ball valves.
Heating (HE)
The heating side consists of a stainless steel plate heat exchanger,
safety valve, manometer, thermometers, ball valves, drain valve, air
valve, expansion vessel and circulation pump. The temperature
of the heating can be controlled thermostatically or by an
electronic temperature controller with an outdoor temperature
sensor. Depending on the application, different heat exchangers
dimensioned for central or floor heating can be used. As an option
the substation can be equipped with a thermostat with safety
monitor. This is possible only for substations with electronic
temperature controller.
Domestic hot water (DHW)
The substation can be supplied with connection pipes for a hot
water tank on the primary or the secondary side of the heat
exchanger.
2 | © Danfoss | 2022.11
AQ221686472754en–010401 / LUK4030601
Operating Guide Termix VX with complete insulation
