Technical data
10.3 Sensor for SONO 3500 CT
SONO 3500 CT
Operating Instructions, 07/2019, VI.SH.P2.02
69
Note
The installation orientation of the battery may influence the battery capacity. Optimal battery
capacity is achieved with the battery in an upright position.
10.3
Sensor for SONO 3500 CT
Table 10- 2 Technical data
Description
Specification
Pipe design
2-track sensor with flanges and integrated transducers wet-calibrated
from factory
Nominal size
DN 100, 125, 150, 200, 250, 300, 350, 400, 500, 600, 700, 800, 900,
1000, 1200
Pressure rate
PN 16, PN 25, PN 40, EN 1092-1
Pipe materials
Carbon Steel EN 1.0345 / p235 GH, painted in light gray
Transducer design
Integrated version and welded onto the pipe
Transducer material
Stainless steel (AISI 316 / 1.4404) / brass (CuZn36Pb2As)
Media temperature
Remote: 2 to 200 °C (35.6 to 392 °F)
1)
1)
MID: minimum temperature 15 °C (59 °F)
Содержание SONO 3500 CT
