SONO 3500 CT
Operating Instructions, 07/2019, VI.SH.P2.02
37
Commissioning
6
Commissioning the device includes the following steps:
1. Resetting the battery lifetime, see Start-up routine (Page 39).
2. Configuring the device via SIMATIC PDM, see Commissioning via PDM (Page 40).
It is recommended to read the basic guide to the local display and the menu structure in
Operating the local display (Page 37) and Navigating the menu structure (Page 38) before
commissioning the device.
6.1
Operating the local display
The local display is divided into 3 areas:
●
Top area with symbols for status information
●
Mid area with actual readings
●
Lower area with index number of the shown menu
Activate the push button to go the next index menu and related information.
Figure 6-1
Operating the local display
Table 6- 1
Status information symbols
Symbol
Description
Mains power supply connected
Battery charge status
Warning
Содержание SONO 3500 CT
