Introduction
1.5 Further Information
10
SONO 3500 CT
Operating Instructions, 07/2019, VI.SH.P2.02
Sensor system nameplate
①
Sensor production code and serial number
②
Dimension (nominal size ordered)
③
Pressure rating (nominal pressure rate ordered)
④
Maximum flow value (qs), Nominal flow value (qp), Minimum flow value (qi)
⑤
Cable length (one transducer cable)
⑥
Calibration factor
⑦
Ambient temperature range
⑧
Water temperature range
⑨
Production year
⑩
System number (order code identifying selected options and system serial number)
⑪
Type approval number
⑫
Accuracy class
⑬
Environmental class
⑭
Verification markings
⑮
PED marking
Figure 1-2
Sensor system nameplate
Note
The matched paired transmitter and sensor shall be mounted together
Please check that the system nameplates of transmitter and sensor have the same system
serial number.
1.5
Further Information
Product information on the Internet
The Operating Instructions are available on the Danfoss homepage, where further
information on the range of Danfoss flowmeters may also be found: Product information
www.danfoss.com/en/products/energy-metering/dhs/energy-metering/
Содержание SONO 3500 CT
