8
Commissioning (RF only)
If the thermostat and the receiver have been supplied
together in a combined pack, the units have been paired in
the factory and no commissioning is required (RX1 only).
Step 1
RET B-RF
Position the setting dial to number
1. Remove dial, press & hold
LEARN
button for 3 seconds (located under
setting dial).
Do not replace the setting dial yet
NOTE: Thermostat now transmits
signal continuously for 5 mins.
Step 2
RX1
Press and hold buttons
PROG
and
CH1
until green light
fl ashes.
LEARN
Installa
tion Instruc
tions
GB
For latest prices and delivery to your door visit MyTub Ltd - 0845 303 8383 - www.mytub.co.uk - [email protected]