Receiver icon troubleshooting
Icon
Description
Action
Power failure
Check the receiver power supply
Hardware error
Contact distributor; replace receiver
CAN error
Contact your distributor
Repose state due to active stop
Release stop button and turn transmitter on
Repose state due to passive stop
Reestablish link to activate the transmitter
Linked state
Correct link
Correct ID (link quality as indicated by the bar)
In case of no signal, check if the transmitter is turned on
Incorrect ID
In case of interference, change frequency channel
RF signal detected
In case of interference, change frequency channel
Mask error
Contact your distributor
User Manual
R13 F Receiver
Troubleshooting
©
Danfoss | January 2019
BC292382016572en-000101 | 9
